Description

The Desco 19341 Continuous Mini Monitor with North America Power Adapter provides reliable monitoring of one operator and one ESD worksurface. The NEW illuminated enclosure increases visibility for the operator and supervisor. Improved alarms indicate proper grounding or a failed connection. Additional features include a park delay timer, park snap, and mat monitor switch for added convenience.

Features:

• Single Workstation Continuous Monitor
  Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
• NEWIlluminated Enclosure
  Makes the status of the operator and worksurface highly visible to the operator and supervisor
• IMPROVEDContinuous Visual and Audible Alarms
  Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs; illuminates blue to indicate standby mode
• NEWPark Delay Timer and ParkSnap
  Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
• NEWMat Monitor Switch
  Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
• NEWAudible Alarm Adjustment
  Sets the audible alarm volume from loud to louder
• Wave Distortion Technology
  Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist straps path-to-ground and the presence of its 1 megohm safety resistor
• Threaded Worksurface Grounding and Mounting
  Grounds and monitors the worksurface with no additional wire
• Single-Wire Impedance Design
  Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
• 1.2 Volt Operator Test Voltage
  Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
• <50 Millisecond Alarm Response Time
  Identifies failures and intermittencies that inferior technologies miss
• Desco19344Ring Magnets
  Mounts the monitor in areas without a worksurface
• Calibration Verification
  Use the Desco98221Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
• NIST Calibrated Original Calibration Certificate can be DownloadedHere
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, seeCalibration.
• 100-240VAC Safety Certified Power Adapter with North American Plug
  Works with standard electrical systems in North America, Japan, and Asia
• Made in the United States of America
  This item is madeChino, CA

DES 19341– Mini Monitor: Installation, Operation and Maintenance